Modular Suppressors: ADAPT Modular Technology

Loading... 61 view(s)

Modular Suppressors: ADAPT™ Modular Technology

Before modular suppressors, you were stuck with one suppressor configuration per tax stamp. With our ADAPT™ Modular Technology, you essentially get two suppressors in one. We offer our ADAPT Modular Technology in our rifle, pistol and rimfire suppressors.

Modular Suppressor Benefits

A suppressor is a lifetime investment - which is why versatility is key. First-time buyers are typically looking for maximum suppression, but over time decide they'd like to have a lighter and shorter option with reduced gas blowback. In the past, you'd purchase a suppressor for maximum suppression, then end up purchasing a second suppressor for a more compact option. Modular suppressors allow you to shorten the length of the suppressor decreasing its length/weight and gas blowback, in exchange for a slight loss in suppression. This allows you to have the best of both worlds.

ADAPT™ Modular Technology

Our ADAPT™ Modular Technology allows you to have a modular suppressor, with or without tools. Here are the three steps to quickly change your suppressor's configuration:

Step 1: Remove the End Cap from the ADAPT™ Module

The end cap can be removed with your fingers or the provided end cap tool.

Step 2: Remove the ADAPT™ Module

This can be done by hand or with a strap wrench.

Step 3: Thread the End Cap onto the Suppressor Body

This can be done by hand or with a strap wrench.

Considerations

When changing your suppressor's configuration make sure it has cooled to ambient temperatures. This will ensure you don't burn yourself and will prevent the end cap or module from becoming stuck due to thermal expansion.

You can make this proccess even faster by purchasing an additional end cap so that you no longer have to remove your end cap from the module. An example of this would be someone using their SurgeX in it's full configuration on a 7.62 bolt gun and the short configuration on their AR15. They could leave the 7.62 front cap in the module and purchase a 5.56 front cap that they use for the short configuration. This would better optimize their suppressor and speed up the process of changing configurations.

If you have any questions on our ADAPT Modular Technology or suppressors in generaly please reach out. We'd love to hear from you.